Scanning A Book - Microtek XT7000 HS User Manual

Scanning a Book

The Book Scan button in ScanWizard DI is quite helpful when you want to scan
a physical book and save it as an electronic file. The scanned result can be used
directly as an E-book and you do not need any editing software to maintain it
later.
1. Launch ScanWizard DI as a stand-alone program by clicking on the
2. Follow the procedure (steps 3 through 8) for "Scanning Documents" section
3. Click the OK button to close the Scan Setup interface and return to the Main
4. In the Main interface, click the File Name menu
5. If it is the first time that you scan a book, follow the
Normal Scan
mode is the
default scan
mode
30 XT7000 HS Scanner User's Manual
ScanWizard DI icon on the desktop.
to specify your scanning requirements in the interface.
interface of ScanWizard DI.
button to select a file format for the scanned
images.
If you want to save all scanned pages of your book
in one file, please select "PDF-Multiple Pages" or
"TIFF-Multiple Pages" from the drop-down option
menu.
steps below to switch to the Book Scan mode from
the Normal Scan mode.
a) Click the Arrow icon next to the Normal Scan button (by default) to
bring up the Scan mode options menu.
b) Move your cursor upon the "Book Scan" and click to select it, the Book
Scan button will appear on the screen. Then, select an opening direction
for your book from its submenu.
When done, the Book Scan mode is activated.
Arrow icon
According to the opening direction of a book, the system offers you three
choices: Left Hand Open, Right Hand Open and Upward Open. Move your
cursor upon the option to highlight and select it.
Book scan mode