To Prepare for Use
1. Perform Step 1, 2, 3 and 4 specified in "
2. Check the displayed waveforms and compare them with the waveforms shown in
Figure 7.9
3. Use the probe compensation adjustment tool provided in the accessories to adjust
the low-frequency compensation adjustment hole on the probe until the displayed
waveform is consistent with the "Perfectly compensated" waveform shown in
Figure 7.9
16
.
Over compensated
Figure 7.9 Probe Compensation
.
Function Inspection
Perfectly compensated
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
".
Under compensated