Table of Contents
Advertisement
5.3
1.800.544.2843
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
WARNING
To avoid electric shock, ensure that the instrument is correctly grounded.
TIP
If the oscilloscope is equipped with battery pack, the battery will also be powered.
Turn-on Checkout
After the instrument is connected to the power source, press the power switch
the lower-left corner of the front panel to power on the instrument. During the start-
up process, the instrument performs a series of self-tests. After the self-test, the
splash screen is displayed.
•
Restart: Click or tap
reboot?" is displayed. Click or tap OK to restart the instrument.
•
Shutdown:
-
Click or tap
shutdown?" is displayed. Click or tap OK to shut down the instrument.
-
Press the power switch
shutdown?" is displayed. Click or tap OK to shut down the instrument.
-
Press
twice to directly shut down the instrument.
www.calcert.com
15
10
20
5
25
0
30
Figure 5.2 Connecting to Power
> Restart. Then a prompt message "Are you sure to
> Shutdown. Then a prompt message "Are you sure to
and a prompt message "Are you sure to
To Prepare for Use
at
sales@calcert.com
13
Advertisement
Table of Contents
