Table of Contents
Advertisement
Procedure:
1. Unplug the power supply (where used) from the mains.
2. Fully press down the two unlocking buttons and carefully pull the battery or power
supply out of the device.
Do not use force!
3. The battery can now be recharged in the charger (please take note of the separate
operating instructions for the charger and the batteries to be used); alternatively, the
power supply can be replaced.
4. Insert the recharged or new battery into the eDRAULIC device until it reaches the
stop. The battery or power supply will be automatically locked when correctly oper-
ated.
5.2 Operating the star grip
(also see chapter on "Operating movement control")
Open the device (
Turn the star grip in the direction of the corresponding symbol
(open) and hold it in this position.
Close the device (
Turn the star grip in the direction of the corresponding symbol
(close) and hold it in this position.
"Dead-man's" function:
Following release, the star grip automatically returns to the
central position, fully guaranteeing load retention.
):
):
14
Connection slot
Advertisement
Table of Contents
