Functional Description; Description - Idex HURST eDRAULIC SC 258 E2 Instruction Manual

Combi tools

Table of Contents

4. Functional description

The combination devices have been designed in such a way that a hydraulically operated

piston activates mechanical joints symmetrically to open or close a set of two opposite blade

arms, thus enabling objects to be cut.

For all devices, the movement is activated by means of a valve in the form of a star grip.

All devices guarantee the dead man's switch and the full load-supporting function when the

star grip is released.

HURST eDRAULIC devices do not need to be connected to an external hydraulic source

(e.g. a motor pump). Generation of the required hydraulic pressure takes place within the

body of the device.

Either a battery or an external power supply must be connected as an energy source.

You can choose which energy source you wish to use. Both the accumulator battery and

the mains power unit can be inserted into the opening provided in the body of the tool.

They are then automatically locked into position.

You can extend the operating time of your eDRAULIC device by using several batteries.

The batteries can be recharged after use, using a suitable external charger.

If you are making use of an external power supply, the device can be used for an almost

unlimited time. This time is only limited by the external energy source and the overheating

switch of the power supply.

To allow you to select the best possible energy supply for your eDRAULIC device, neither

the battery nor the power supply form part of the delivery scope. You will find suitable bat-

teries and power supplies in the HURST accessories list.

eDRAULIC devices come with standard light fittings to facilitate work under poor light

conditions.

The light-emitting diodes attached on the operating side light up the work area. The

main switch has also been equipped with a ring light, so that you can immediately detect

whether the device is switched on or not. When exchanging the battery or power supply,

the connection slot will light up for approximately 30 seconds.

Table of Contents