Pulling - Idex HURST eDRAULIC SC 258 E2 Instruction Manual

6.4 Pulling

WARNING / CAUTION / PLEASE NOTE!
The light metal alloy arms may not be damaged.
- HURST chain sets must be used for pulling.
- When using a chain for pulling, make sure that the pins and hooks are positioned correctly
so that the chain cannot slip.
- Only chain sets in perfect condition may be used.
- The pulling chains must be checked by an expert at least once a year.
- Also consult the separate operating instructions for the corresponding chain set!
The connecting pieces for HURST chain
sets are fastened to the blades using
load bolts in holes "A". (see illustration
on the right)
Chain sets:
for SC 258 E2: KSV 8/258
for SC 358 E2: KSV 11
for SC 757 E2: KSV 13
for SC 758 E2: KSV 13
NOTE:
Also take note of all the instructions and regulations in the separately provided
operating instructions for the chain sets.
20
Attachment hole
for chain sets
A