Table of Contents
Advertisement
Pulling with SC 757 E2
To use the SC 757 E2 for pulling, the spreader tip must first be removed (see 6.2).
The pulling attachment "A" is then mounted.
First pull out the bolt of the pulling attachment up to the limit stop, slip the pulling attachment
onto the arm and push in the bolt completely until it engages (also see Section 6.2, "Removing
and attaching the Spreader Tip") in this regard.
B
2.
C
A
1.
The matching chain lock "C" can then be fixed to hole "B" of the pulling attachment (see
separate operating instructions for chain lock).
21
Advertisement
Table of Contents
