Idex HURST eDRAULIC SC 258 E2 Instruction Manual page 10

WARNING / CAUTION / PLEASE NOTE!
The following may not be cut / squeezed:
- live cables
- prestressed and hardened parts such as springs, spring steels,
steering columns and rollers
- pipes under gas or liquid pressure,
- compound materials (steel/concrete)
- explosive bodies such as airbag cartridges
The operating pressure placed on the rescue device may only be directly changed
after consultation with HURST. A change in settings may result in damage to
property and/or injuries.
HURST eDRAULIC devices are not explosion-protected!
When using the devices in potentially explosive environment, the following
must be excluded:
- that the device could trigger an explosion.
- that working with the device could trigger an explosion; e.g. sparks may result
from cutting an object.
The responsibility for explosion prevention or for ruling out work with an eDRAULIC
device with the operator of the device or with the person responsible at the place
of use.
When working in areas at risk of explosion, all applicable legal,
national and international regulations, standards and safety rules
for avoiding explosions must be observed without restriction!
The rescue equipment should not come into contact with acids or alkalies. If this
is unavoidable, clean the equipment immediately afterwards with a suitable
cleaning agent.
You can obtain accessories and replacement parts for the rescue devices from your
authorized HURST dealer!
10