Preventive Service; Repairs - Idex HURST eDRAULIC SC 258 E2 Instruction Manual

9.2 Preventive service

9.2.1 Care instructions
The outside of the device should be cleaned with a damp cloth from time to time (not the
electrical contacts in the connection slot, on the battery and on the power supply). In
addition, the metal surfaces are to coated with a suitable medium to counteract corrosion (not
the electrical contacts in the connection slot, on the battery and on the power supply).
(In case of doubt, contact your authorized HURST dealer or HURST directly!)
9.2.2 Function and load test
If there is any doubt regarding the safety or reliability of a device, a function and stress test
must also be performed.
HURST offers appropriate test equipment for this.

9.3 Repairs

9.3.1 Replacing the blade, protective cover and hand grip of the
combination tool SC 258 E2, SC 358 E2, SC 757 E2 and SC 757 E2
Components to be
replaced
Protective cover
Pivot bolt
Handle
Blade
Required work steps
1., 2. and 7.
1. - 4. and 7.
1. - 6. and 7.
1. - 5. and 7.
29