Center Punch Clamp Production Tool
The SM1700 is easy-to-
use. The tool installs 5/8"
wide Center Punch Clamps
from 1" - 8" in diameter.
SM1700 Features:
One step setup – Our engineers designed this tool to save your valuable time.
Adjust the clamp tension and install! Unlike other tools, the pre-charged gas
cylinder needs no adjusting for different diameter clamps.
Foot Controlled – Allows both hands to control hose assembly positioning. Your
operator can install clamps with greater confidence and safety.
Consistent Lock – The consistency of the depth of the dimple lock maximizes
Center Punch clamp strength.
Proven Mechanical Design – Reduces your maintenance and downtime. When
support is required, BAND-IT® repairs 99% of tools within three working days.
Portable – Install on a standard work bench or mount on a cart – whichever you
prefer. The small size makes it easy and less costly to ship.
If you clamp 10 or more hoses
by hand daily, you should use
the SM1700 Center Punch
Production Tool!
• Simplifies Center Punch clamp installation
• Reduces hose assembly failures
• Increases productivity
The SM1700's pre-charged gas cylinder produces
consistently deep, well formed, strong locks.