Cutting - Idex HURST eDRAULIC SC 258 E2 Instruction Manual

Combi tools
Table of Contents

Advertisement

It is strictly prohibited to reach into the path of the
rescue device (e.g. between the blades and the material/
object to which the force is to be applied)!
CAUTION / PLEASE NOTE!
The strong effect of the force of the rescue equipment during operation could
cause pieces of the vehicle to break off or fly off, posing a danger to persons.
Those not involved in the rescue operation should therefore keep at a safe
distance appropriate to the situation. Any trapped or enclosed persons must
be protected.

6.2 Cutting

The blades should be positioned at a 90° angle to the object to be cut, if possible.
9
RIGHT
Higher cutting capacities can be achieved by cutting as close as possible to the blade's pivot point.
RIGHT
12
90°
16
3
WRONG
WRONG

Advertisement

Table of Contents
loading

Table of Contents