Table of Contents
Advertisement
8.1 Oil change
Under normal working conditions routine oil changes are not necessary with eDRAULIC
tools.
The prerequisite is that:
• the tools are always properly handled and stowed as per the applicable operating manual
• the tools are tested on a regular basis as per our instructions on preventive maintenance
(see chapter 8)
• after 10 years service life an oil change is recommended
Regular tests, oil change and/or repairs must be carried out by repair and maintenance
personnel that is trained and authorized by the manufacturer.
8.2 eDRAULIC combination tools
Inspections to be carried out:
Visual Inspection
Combination tool
• Opening width of the blade arms on the tips (see chapter "Technical data"),
• General tightness (leaks),
• Operability of the star grip - check the automatic return into middle position after release
(dead man's function),
• Existence and stability of handle,
• Labels complete and legible,
• Covers in perfect condition,
• Check the torque of the pivot bolt (for torque M
• Blade arms free of cracks and nicks or deformations on the cutting surfaces,
• Cutting surfaces fit on top of each other without making contact,
• The sliding plates, bolts and retaining rings of the blade arms are in place and in good
condition,
• Illumination of main switch, work area and connection shaft fully functional.
Battery and power supply
• Casing undamaged
• Electrical contact surfaces clean and undamaged
• Cable undamaged
• Battery(-ies) fully charged (when used)
• Charging state display of lithium-ion battery or batteries fully functional
• The battery has not been exposed to water, oil or moisture
• There are no signs that the battery has been damaged or that it is malfunctioning or
operating inconsistently with Akku Power GmbH Safety Instructions for eDRAULIC
batteries which are included with the batteries
see "Technical Data").
A,
26
Advertisement
Table of Contents
