Battery Charger; Power Supply - Idex HURST eDRAULIC SC 258 E2 Instruction Manual

12.2 Battery charger

Only the "eDRAULIC Power Pack Charger" may be used for the lithium-ion batteries.
NOTE:
Pay strict attention to the separate operating instructions for the battery charger.

12.3 Power supply

The eDRAULIC devices have a specially developed power supply with which the devices
can be directly connected to the power grid. The power supply converts the alternating
current from the power grid into direct current, which means that it can be used instead of
the battery.
Adapter
Cable
Structure:
There is an adapter on one side of the power supply which can be simply inserted into
the connection slot of the devices and locked. The other side has a mains plug. Both are
connected by a cable. The mains plug is a Schuko plug with Protection Classification IP
68 or a US plug. The integrated filter is appropriate for the conversion of AC voltage to DC
voltage.
NOTE:
Pay strict attention to the separate operating instructions for the power supply.
Filter
41
Mains plug
Cable