Table of Contents
Advertisement
Work steps:
1. First of all, carefully clean the rescue equipment.
CAUTION / PLEASE NOTE!
When operating the device with
the hand guard removed, there is
an increased risk of injury caused
by the exposed, moving elements.
3. Move the blade arms on the until bolt
"E" is easily accessible.
Now switch off the device and
remove the battery or unplug the
power supply from the device.
2. Remove the two fixing screws "A" and
remove the protective cover "B". To do
this, first pull the rounded rear edge
outwards and then backwards through
the hand grip, as the edges of the
protective cover adjoining the cylinder
body are kept in place by guide grooves.
If necessary, loosen the hand grip and
move it backwards to obtain sufficient
space to pull it out.
A
B
E
E
30
Advertisement
Table of Contents
