Digigram ALP222e-Mic User Manual page 35

User Manual – ALP222e & ALP222e-Mic
Sample size
This setting defines the format of samples exchanged between the
application and the card driver.
Enable Direct Monitoring Control
Tick this setting to authorise an ASIO application to drive the zero latency
hardware monitoring of inputs towards outputs. If an application monitors
software, this causes latency between the input signal and the output
signal, linked to the ASIO buffer sizes.
Boost ASIO priority
This option allows the system to run the ASIO process with high priority,
thereby increasing the reliability of this process. Caution, however, this
can make other processes unstable.
Audio errors
This section is used to visualise current errors for playback and recording
via the ASIO driver. Errors frequently reflect too small an ASIO buffer size
for the system's possibilities. Should they occur, then the buffer size needs
to be increased until there are no more errors.
Error counters can be reset to zero by clicking on the RESET button.
Lastly, a time counter displays the time elapsed since the last counter
reset.
35