Table Of Contents - Digigram ALP222e-Mic User Manual

User Manual - ALP222e & ALP222e-Mic
1 INTRODUCTION
2 IMPORTANT NOTICE
3 BOX CONTENTS
4 GENERAL CHARACTERISTICS
4.1 Main hardware characteristics
4.2 Main software characteristics
4.3 Routing audio streams in the card
5 REQUIRED CONFIGURATION
5.1 Required hardware configuration
5.2 Necessary software configuration under Windows
5.3 Necessary software configuration under Linux
6 HARDWARE INSTALLATION
6.1 Preparing the card
6.2 Installing the card
6.3 State of internal LED
7 SOFTWARE INSTALLATION UNDER WINDOWS
7.1 Very first installation
7.2 Updating the driver version
7.3 Updating the firmware
7.4 Verifying the card installation
7.5 Adjusting the internal latency of the card
7.6 Replacing a card
7.7 Changing the order of installed cards
8 UNINSTALLING THE DRIVER UNDER WINDOWS
9 CONFIGURING THE CARD UNDER WINDOWS VIA THE ALP-X MANAGER APPLICATION
9.1 Sampling clock management
9.2 Managing input and output levels
9.3 Managing the routing and mixing of input signals
9.4 Display of GPIOs and control of GPOs
9.5 Creating, saving and loading setting sessions
9.6 Firmware update procedure
9.7 Keyboard shortcuts
10 ASIO CONTROL PANEL for Windows
11 SOFTWARE INSTALLATION UNDER LINUX
11.1 Automatic installation
11.2 Building and installing the driver manually
12 CONFIGURING UNDER LINUX VIA AMIXER
12.1 Diagram of the inputs towards outputs chain
12.2 Description of controls
12.3 Setting the parameters from amixer
13 SPECIFICATIONS

TABLE OF CONTENTS

4
5
6
7
7
7
7
9
9
11
11
12
12
12
12
13
13
15
15
15
18
19
19
21
22
23
24
28
31
32
32
34
35
37
37
37
38
38
39
45
59
2