Managing Input And Output Levels - Digigram ALP222e-Mic User Manual

User Manual – ALP222e & ALP222e-Mic

9.2 Managing input and output levels

At the first installation of the card, the default gain settings are as follows:
Input analog gains are set to 0 dB (+24 dBu-> 0 dBfs).
●
Digital input and output gains are set to 0 dB
●
The 8x8 routing matrix is configured this way:
●
- Play 1-2 routed to outputs 1-2
- Play 3-4 routed to outputs 3-4
- Inputs 1-2 (analog) routed to Rec 1-2
- Inputs 3-4 (AES2) routed to Rec 3-4
The other routing points of the matrix are muted.
Click on the icon to access the "I/O Monitor" view which is used to adjust the ALP cards audio
levels.
If an external clock is selected, the card is
synchronised to it as long as it is present.
If the external clock signal is lost, the ALP card falls back
to its internal clock, which is automatically set at the
same frequency as the external clock.
The clock source used at a given moment is displayed in
the "Sync Source" field, and its frequency value is given
by the "Sampling Rate" field.
23