Digigram ALP222e-Mic User Manual page 17

User Manual – ALP222e & ALP222e-Mic
Input analog gains are set to 0 dB (+24 dBu-> 0 dBfs).
●
Digital input and output gains are set to 0 dB
●
7.4.2 Card detected by the Digigram ALP-X Manager
application
The ALP-X Manager application, installed with the driver, is used to control the ALP card settings
via a graphic interface. This application can be launched from the shortcut created on the
desktop or from the start menu, Digigram group. The card must appear as below if it and its
driver are installed correctly. Note that a maximum of eight ALP cards can be displayed and
handled in ALP-X Manager.
Note: When the ALP Manager application is started, if the driver detects that the firmware version
on the ALP Card is too old, a message like the following one is displayed.
If several ALP cards are running in the PC with a too old firmware version, one message per card is
displayed.
From the list of ALP cards displayed in the ALP Manager, a firmware to be updated is displayed in
red colour as shown below.
Please refer to the
firmware update procedure.
17