User Span - emitor COMBOLOOK Color Manual

K. K. K. K. User Span (individual setup of frequency User Span (individual setup of frequency User Span (individual setup of frequency- - - - bands). User Span (individual setup of frequency
Color
The COMBOLOOK COMBOLOOK COMBOLOOK COMBOLOOK
the entire frequency range of 2 – 900 MHz.
In many cases, however, only certain areas of this bandwidth are really needed in order
to complete a specific task.
Color
The COMBOLOOK COMBOLOOK COMBOLOOK COMBOLOOK
of parameters (e.g.: “return path”; “UHF only”; “FM Only”; etc.). This unique feature allows
an installer to individualze a specific Set-Up for a specific job, or objective.
To program the meter to only “view” a user To program the meter to only “view” a user To program the meter to only “view” a user To program the meter to only “view” a user- - - - defined portion of bandwidth:
* Choose a frequency-band to program (e.g.: 5 - 65 MHz) and position the cursor in the
approximate median/center of that area (approx.imately 31 MHz).
* Using the control control control- - - - button control button; index to the “SPAN” button
top of the LCD screen). Reduce the “view-window” of the spectrum by turning the knob
so that only the desired bandwidth is visible on the monitor’s screen.
Note: It may take a bit of effort (indexing between the “Freq” and “Span” modes) in order to Note: It may take a bit of effort (indexing between the “Freq” and “Span” modes) in order to Note: It may take a bit of effort (indexing between the “Freq” and “Span” modes) in order to Note: It may take a bit of effort (indexing between the “Freq” and “Span” modes) in order to
obtain the “exact” bandwidth; but remember this will be saved to memo obtain the “exact” bandwidth; but remember this will be saved to memo obtain the “exact” bandwidth; but remember this will be saved to memo obtain the “exact” bandwidth; but remember this will be saved to memory and there’s no
need to touch it again, until it’s deleted! need to touch it again, until it’s deleted!
need to touch it again, until it’s deleted! need to touch it again, until it’s deleted!
* When the desired Bandwidth is tuned in, press the ”Memory
* Press button # 2 for “User span
memory-position
* Determine the
an identifying name/number). The desired bandwidth will be programmed to a specific
location in the LCD-display.
- Repeat the above steps to memorize more than one set of frequency-bands (up to 8
bands).
To Open and operate To Open and operate To Open and operate To Open and operate within a “User Defined Span”:
* Select ”User span User span” in the

User span

User span
* Choose from any of the programmed frequency-bands that may be listed.
(TV Component) initally powers “ON” with the display showing
is capable of set-up and operation within a user specified set
button “SPAN” function (“Span” will be displayed at the “SPAN”
User span” and then, ”Save User span User span
this programmed bandwidth should have (as well as
within a “User Defined Span”: within a “User Defined Span”: within a “User Defined Span”:
Main-Menu
bands). bands). bands).
defined portion of bandwidth: defined portion of bandwidth: defined portion of bandwidth:
“SPAN”
Memory”-button (# 9).
Memory Memory
Save” (button #1). Save Save
(button # 2).
27
ry and there’s no ry and there’s no ry and there’s no