Pol; Diseqc; Diseqc Control; Setup - emitor COMBOLOOK Color Manual

• Move the cursor to any desired frequency (peak).
Push the # 3 button (Span Min
The instrument ”zooms in” to maximum for viewing the selected frequency (Span
Min = 250 MHz bandwidth).
Rotate the LNB so that either the Horizontal
maximum-position – adjusting the cross
Pressing the # 3 button again (span Max), takes you back to ”Max zoom out”.
5. X- - - - pol: 5. X

pol:

5. X 5. X pol: pol:
Test the maximum Cross-polarization setting with the X X X X - - - - pol f=Function
The instrument will measure the strength of the selected peak and then
automatically "jump" to the other polarity and measure it as well (same
frequency and settings).
The difference (for ex. -7dB) is presented on the right hand side of the
display.
This function is useful for checking the correct setting of the LNB cross-
polarization.

6. DiSEqC

6. DiSEqC 6. DiSEqC 6. DiSEqC
(Chooses DiSEqC command with the keypad).
Submenu 7 (SWx) shows the extended DiSEqC 1.1 commands.
Submenu 8 (Motor) shows the DiSEqC actuator-control commands
(DiSEqC 1.2).
Even 13/18V and 22 kHz on/off can be adjusted in this mode.

7. Setup

7. Setup 7. Setup 7. Setup
( ( ( ( Basic-operation setup):
1. LNB L.O LNB L.O.: Select the LNB L.O. (Local Oscillator) for showing the correct
LNB L.O LNB L.O
LNB frequency.
Default setting is button # 9 (IF).
2 2 2 2 . Analog Analog Analog Analog. Choose between Normal (KU-band) - Inverted (C-band) video.
3. Motor. 3. Motor. Choose the type of actuator to be used; standard DiSEqC 1.2,
3. Motor. 3. Motor.
SatSelect or SATSCAN.
4. Display 4. Display. Submenu units
4. Display 4. Display
Under submenu LCD
5. AutoOff. 5. AutoOff. 5. AutoOff. Choose between automatic turn-off alternatives (timer). 5. AutoOff.
6. Version. Instrument data: serial number/software/Mfg. date. 6. Version
6. Version 6. Version
7. Keyclick 7. Keyclick 7. Keyclick 7. Keyclick. On or off. Audible tone when buttons are depressed.
Span Min) on the keyboard. Span Min Span Min
Horizontal or Vertical
Horizontal Horizontal
cross- - - - polarization cross cross
units: Select dB-presentation: dbuV, dbm or dBmV.
units units
LCD can contrast (level) and Backlight (on/off) be set. LCD LCD
Vertical polarization will be in its
Vertical Vertical
polarization. polarization polarization
16
pol f=Function.
pol f=Function pol f=Function