External Video/Audio; Favorite-Channels - emitor COMBOLOOK Color Manual

Select (using button # 1 thru 3) any of the following three versions: Select (using button # 1 thru 3) any of the following three versions
Select (using button # 1 thru 3) any of the following three versions Select (using button # 1 thru 3) any of the following three versions
•
Beeper Beeper Beeper: Beeper
For use when situations inhibit viewing of the signal level on the meter’s display. The
Color
COMBOLOOK COMBOLOOK COMBOLOOK COMBOLOOK
variable-pitched tone (also has a “volume” setting) that increases in pitch as the
signal strength increases.
This function may also be accessed via ”Sound
button # 3 for ”beeper beeper”. beeper beeper
The beeper is turned Off by selecting “Beep off” with button # 2. The beeper is turned Off by selecting “Beep off” with button # 2.
The beeper is turned Off by selecting “Beep off” with button # 2. The beeper is turned Off by selecting “Beep off” with button # 2.
I. I. I. I. External Video/Audio.

External Video/Audio.

External Video/Audio. External Video/Audio.
External Video and Audio signals may be used with the COMBOLOOK (for ex. TV-
signals from a head-end).
This is made by first connecting the Video/Audio signals via the RCA-type
connections on the side of the instrument.
The function is accessed by choosing ”Picture
pressing button # 6 for ”Ext A/V
J. J. J. J. Favorite Channels. Favorite Channels. Favorite Channels. Favorite Channels.
Thanks to the instrument’s powerful processor, it can easily memorize and measure
data on (up to) 100 favourite channels (for ease in selection of channels).
Programming of Favorite- - - - Channels: Programming of Favorite
Programming of Favorite Programming of Favorite
* In “Spectrum Mode Spectrum Mode”; place the cursor on the desired frequency for programming (ex. Spectrum Mode Spectrum Mode
125 MHz).
* Choose “Picture Picture Picture” (button # 1). Picture
* Next; choose “Memory Memory” (button # 5).
Memory Memory
* Then select a suitable
(using the large potentiometer knob).
The Memory Position will be displayed at the bottom at the LCD-display (e.g.: “Pos
free”, or “Pos 1”), along with data indicating if the selected position is currently
“used”, or “free”.
* Repeat the procedure for additional signal information storage.
The channels are permanently stored in the COMBOLOOK
(until the user is prompted for confirmation of the deletion function).
Measurements on Favorite- - - - Channels: Measurements on Favorite
Measurements on Favorite Measurements on Favorite
Measurements of the “Favourite-Channels” are easily carried out once they have
been programmed. These are perfomed while in “Picture
First, choose ”Favorite Favorite “ with the Favorite Favorite
the LCD-display).
The Favorite-Channels are displayed in sequential-order, on the monitor’s screen;
Indexed by turning the large knob.
’s ”beeper”-function aids in antenna alignment by utilizing a
Ext A/V” (and button # 2).
Ext A/V Ext A/V
Channels:
Channels: Channels:
memory position
Channels:
Channels: Channels:
These are perfomed while in “Picture- - - - Mode”:
These are perfomed while in “Picture These are perfomed while in “Picture
control-button
Main-Menu
Sound” in the
Sound Sound
Main-Menu
Picture Picture” in the “ Picture
(00-99) for placement of this frequency
COMBOLOOK
COMBOLOOK COMBOLOOK
Mode”:
Mode”: Mode”:
Favourite
(“ ” is displayed at the top of
by pressing
” and then by
Color
26