Px-32Xsi (Internal Drive); Rear Panel (Caddy, Tray) - Plextor UltraPlex PX-32CSe User Manual

CHAPTER 5 ---- Drive Features
PX-32XSi Internal Drive (Caddy, Tray)----REAR PANEL
9
SCSI Interface Connector
Audio Output Connector
Audio Output Connector: Outputs stereo analog signal. Use to connect to sound-
board or audio amplifier.
SCSI Interface Connector: Connects to SCSI interface board using 50-pin to
50-pin flat ribbon SCSI cable.
Jumpers: Use to select SCSI ID number, parity, termination, test, block size, and
eject lock options. Leave these jumpers at their factory settings unless one or more of
the following situations pertain to you:
SCSI ID Number: If you are using more than one SCSI peripheral, you may have
to change your SCSI ID number, see page 16.
Termination: Review Chapter 7 to determine if you need to turn your terminator
switch off.
Block Size: If you are working in a UNIX environment and want to boot from your
CD-ROM drive, see page 18.
Eject Lock: If you work in an environment where you need to prevent others from
easily removing a CD-ROM disc from your drive, see page 18.
Power Connector: Connects to your computer's power supply (DC +5V and +12V).
12
ULTRAPLEX OPERATION MANUAL
Power Connector
Jumpers