Table of Contents
Advertisement
Functional Overview
Cursor Buttons and Knob
2–16
Use the NAVIGATION controls to select icons from the various windows and to
set values for signal parameters.
When you use the cursor buttons or knob to move from item to item in a
window, you automatically enter the browse mode. Figure 2–9 shows the
difference between browsed and selected items.
To browse items and select one, use these steps:
1. Push a System Function button such as Test Signals.
2. Push the right-most cursor button to move right through the items. Use the
up or down cursor buttons for vertical browsing. The currently browsed item
has a ring around it. Figure 2–9 shows the difference between browsed and
selected items.
3. Try rotating the knob to move through the displayed items. When an icon
has several selections available, the list box will drop down. Rotating the
knob scrolls through the list selections.
4. To select a browsed item (the one with a ring) push the Select button or
touch the item on screen. To close the list, push the Escape button.
Browsed icon
Selected icon
Figure 2–9: Browsed and selected icons
You can browse test signals for a module, but the output does not change until
you push the Select button or the signal icon. Figure 2–10 shows how to access a
test signal list by selecting the test signal icon and turning the knob.
TG 2000 Signal Generation Platform User Manual
Advertisement
Table of Contents
