Table of Contents
Advertisement
Operating Procedures
Allocating System Resources
Clock Allocation
TG 2000 Signal Generation Platform User Manual
This section provides instructions for using the TG 2000 Signal Generation
Platform menus. The topics are in alphabetical order. For module-specific
functions, refer to the appropriate module user manual.
You can disable clock clients and frame reset clients to free up system resources.
Use this function to free clients of a clock so the clock is available for use by
another module. To disable clock clients, perform the following steps:
1. Push the Utilities button.
2. Touch Clock Clients.
3. Note the status and use of each clock signal. The modules sharing a clock
signal are listed below the client button.
4. To free a clock signal, touch the corresponding Disable Clients icon on the
display (see the following illustration). All modules currently using that
clock signal will be disabled. To recover the clock clients, enable the module
outputs through the Module Parameters window.
If you have two formats currently active, such as NTSC and PAL, and load a
signal using another format, such as 525–143, the Clock Allocation window will
appear. In this window, you can either disable one of the clock clients to free it
for use by the new format or touch Cancel to stop loading the new format.
2–21
Advertisement
Table of Contents
