Table of Contents
Advertisement
Installation and Initial Setup
This chapter includes rack and installation requirements, installation instructions, and initial setup instructions
for connecting to your network.
•
•
•
•
•
•
•
•
•
•
•
Installation Warnings and Guidelines
Note
Before you install, operate, or service a server, review the
for Cisco UCS C-Series Servers
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
Installation Warnings and Guidelines, on page 9
Rack Requirements, on page 11
Installing the Server Chassis in a Rack, on page 12
Installing the Cable Management Arm (Optional), on page 14
Reversing the Cable Management Arm (Optional), on page 15
Initial Compute Node Setup, on page 16
NIC Mode and NIC Redundancy Settings, on page 21
Updating the BIOS and Cisco IMC Firmware, on page 22
Accessing the System BIOS, on page 23
Smart Access Serial, on page 23
Smart Access USB, on page 23
C H A P T E R
Regulatory Compliance and Safety Information
for important safety information.
Cisco UCS C4200 Server Chassis Installation and Service Guide
2
9
Advertisement
Table of Contents
