Replacing Front-Loading NVMe SSDs
Figure 15: Replacing a Drive in a Drive Tray
Ejector lever
1
2
Release button
Replacing Front-Loading NVMe SSDs
This section is for replacing 2.5-inch NVMe solid-state drives (SSDs) in front-panel drive bays.
Caution
NVMe drives are not hot-swappable. You can replace them while the system is running, but you must shut
down the drive in the software or OS before removal.
Cisco UCS C4200 Server Chassis Installation and Service Guide
40
Drive tray screws (two on each side)
3
4
Drive removed from drive tray
Maintaining the Server Chassis