CLAMP MOUNTING
The fixture includes an adjustable mounting yoke that attaches to both sides of the fixture.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the
mounting yoke using a M10 screw fitted through the center hole of the mounting yoke. Be
sure to attach a Safety Cable to the fixture using the safety cable rigging point on the back
of the fixture as illustrated below.
SECURING
Regardless of the rigging option you choose for your fixture, always be sure to secure your
fixture with a Safety Cable. The fixture provides a built-in rigging point for a Safety Cable
on the back of the fixture as illustrated below. Be sure to only use the designated rigging
point for the safety cable.
SAFETY CABLE RIGGING POINT
13