Connecting The Display - Planar Dome E4c Quick Reference Manual

Connecting the Display

Use only the power cord supplied with your display.
To connect the display
1 Connect the DVI cable to either port
of the installed controller board.
NOTE: The AX5 board provides
dual-head functionality: You can run
two Dome E4c displays from one AX5
board. Both DVI ports provide dual-
link functionality and support each
Dome E4c display with the full,
non-scaled 2560 x 1600 resolution.
2 Plug the power cord into the input
power port on the connector plate.
3 Plug the other end of the power
cord into a grounded outlet.
NOTE: The display turns on automatically
when you turn on your computer system.
The bottom port of the
AX5 board has
primary assignment.
AX5 controller
installed
DVI cable
7