Cleaning The Display - Planar Dome E4c Quick Reference Manual

Cleaning the Display

•
Periodically clean the display housing
with a soft, dry cloth to prevent
clogging of the venting holes with
dust or other material.
•
The display screen can be
damaged by excessive scrubbing
and by incompatible cleaning
solvents. Dampen a clean, soft
lint-free cloth with distilled
de-ionized water and wipe the screen
gently. Use a clean, soft, dry lint-free
cloth to remove any residue.
Regulatory Compliance
This display has been tested and found to comply with IEC/EN 60601-1 and IEC/EN 60601-1-2 standards,
and is certifi ed to meet medical standard C22.2 No. 601.1-M90 (C US Mark).
The medical display, in addition to meeting medical requirements, has been tested and found to comply
with the limits for Federal Communications Commission Class B computing devices in a typically
confi gured system since many medical offi ces are located in residential areas. It is the system integrator's
responsibility to test and ensure that the entire system complies with applicable electromagnetic
compatibility laws.
Warranty Summary
• Standard one-year, "repair-and-return" warranty
• Two-year backlight warranty*
• Typical repair turnaround time of 10 business days
* If, within 2 years of initial purchase, the maximum output of the Dome E4c display is determined by
Planar Systems to be less than 175 cd/m 2 , Planar will repair or replace the display at its sole discretion.
•
To remove grease or other organic
contaminants, use a 50% to 70%
IPA (isopropyl alcohol) solution
sparingly. Never use acetone on
the screen, as it can damage the
antistatic hard coating.
11