Handling The Display - Planar Dome E4c Quick Reference Manual

Handling the Display

•
Set up your display on a stable,
level surface away from any direct
light or heat source, but near a
grounded AC outlet.
•
Choose a well-ventilated location
with an adequate amount of space.
Do not block the vents on the back
of the display.
•
Never lift the display by the desk
stand. Use both hands to lift or
move the display. Avoid touching
the screen.
•
Never apply pressure to the screen
or touch the screen with bare fi ngers
or with any objects.
Hand injury may result from misuse of the desk stand when
lowering the display height. Avoid holding the bottom area
of the display. Never place your hands between the display
and the desk stand.
To lower the display height, grasp both sides of the display
and push down.
10
•
Allow the display unit to reach room
temperature before you power it on.
Ambient room temperature ranges
from 20°C to 25°C (68°F to 77°F).
•
Avoid sudden temperature changes
in the environment, as this may cause
condensation in the display.
•
Never remove the back cover or
disassemble the display. There are
no user-serviceable parts inside.
•
When troubleshooting, check that all
cables are properly connected and
that your computer is turned on or
not in power-saving mode.
•
Follow your local governing
ordinance for proper disposal or
recycling of electronic components.