To Set The Operation Mode For The Optional Jetclean System - Agilent Technologies 5977C Series Operating Manual

4 Operating in EI Mode

To Set the Operation Mode for the Optional JetClean System

To Set the Operation Mode for the Optional
JetClean System
Procedure:
1 In Instrument Control view, click the MS Parameters icon.
2 In the Single Quadrupole MS Method Editor navigation panel, select the
3 From the Operation dropdown menu, select a mode.
Figure 32
For a low cost JetClean flow control option, set the JetClean operation mode to
Clean Only. (See
page 103.)
For more detailed information on the JetClean system see the JetClean
Operating manual.
102
JetClean tab. (See Figure
Selecting the JetClean Operation mode
"To Set the JetClean Parameters for the Clean Only Mode"
32.)
5977C GC/MSD Operating Manual
on