Rear Stacker (Option); Figure 33 Solid-510S Installation Of Rear Stacker; Figure 34 Solid-510D Installation Of Rear Stacker; Figure 35 Solid-510L Installation Of Rear Stacker - idp SOLID-510S User Manual

2.6. Rear Stacker (Option)

SOLID-510 can install a rear stacker for option at the back of the printer. In case of SOLID-
510S and SOLID-510L, please install into the slots at the backside. In case of SOLID-510D,
please open the back cover of the printer and install it.
After that, set the value of 'Card Out' to 'Back' in the CardPrinterConfig Program.
In case of CP55 Dual, set the value of 'Flipper Cover Open' to 'Ignore' in the Configuration
Program

Figure 33 SOLID-510S installation of Rear Stacker

Figure 34 SOLID-510D installation of Rear Stacker

Figure 35 SOLID-510L installation of Rear Stacker

26