idp SOLID-510S User Manual page 51

Laminating PPS : Laminating speed.
Laminating Move Pulse : The distance of laminating movement.
Separation with Card : After laminating and removing film, the value changes the
Separation with Film : After laminating and removing film, the value changes the
Lami. Start Card Pos : The value is for laminating start position.
Torque Laminating Max : Maximum torque of motor while laminating.
Torque Laminating Min : Minimum torque of motor while laminating.
Laminating with Pulse : The value is for change laminating width.
Film Attribute : It changes film attribution.
④ It shows "Advanced Setup" window.
distance of card movement
Distance of film movement.
51