Stacker; Figure 14 Rear Side Of Output Hopper; Figure 15 Stacker - idp Smart-70 User Manual

1
3 4
5
2

1.2.7 Stacker

If Output Hopper is not needed, 100 cards can be ejected and loaded by using the Stacker
provided with Input Hopper.
① Kensington lock
Kensington lock is usable.
② Serial communication port
This port is used when external device needs to
control Output Hopper.
③ Power port
Please connect the 24V DC power adaptor
provided with Output Hopper.
④ Power switch
Turn On/Off.
⑤ Communication port
To communicate between SMART-70 modules,
please connect to an adjacent module.

Figure 14 Rear side of Output Hopper

Figure 15 Stacker

24