Lopi Greenfield GSR2 Manual page 5

Safety Warnings (continued)
•
Because this heater can be controlled by a thermostat there is a possibility of the heater turning on and igniting
any items placed on or near the appliance.
•
Light the heater using the built-in igniter. Do not use matches or any other external device to light your heater.
•
Never remove, replace, modify or substitute any part of the heater unless instructions are given in this manual.
All other work must be done by a trained technician. Don't modify or replace orifices.
•
The viewing glass should be opened only for conducting service.
•
Allow the heater to cool before carrying out any maintenance or cleaning.
•
Operate the heater according to the instructions included in this manual.
•
If the main burners do not start correctly turn the gas off and call your dealer for service.
•
This unit is not for use with solid fuel.
•
Do not place anything inside the firebox (except the optional artwork).
•
Warning: Do not operate appliance with the glass front removed, cracked or broken. Replacement of the
glass should be done by a licensed or qualified service person.
•
Do not throw this manual away. This manual has important operating and maintenance instructions that you will
need at a later time. Always follow the instructions in this manual.
•
Instruct everyone in the house how to shut gas off to the appliance and at the gas main shutoff valve. The gas
main shutoff valve is usually next to the gas meter or propane tank and requires a wrench to shut off.
•
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this appliance and shall
be installed for the protection of children and other at-risk individuals.
•
If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for this appliance.
•
Clothing or other flammable material should not be placed on or near the appliance.
•
Any safety screen, guard, or barrier removed for servicing an appliance must be replaced prior to operating the
appliance.
•
Installation and repair should be done by a qualified service person. The appliance should be inspected before
use and at least annually by a professional service person. More frequent cleaning might be required due to
excessive lint from carpeting, bedding material, et cetera. It is imperative that control compartments, burners,
and circulating air passageways of the appliance be kept clean.
•
Travis Industries, Inc. grants no warranty, implied or stated, for the installation or maintenance of your
heater, and assumes no responsibility of any consequential damage(s).
SAFETY WARNINGS:
•
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
•
DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
•
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN
OPERATION.
•
DO NOT MODIFY THIS APPLIANCE.
•
THIS INSTALLATION MUST CONFORM WITH THE FOLLOWING:
−
Manufacturer's Installation instructions
−
Local Gas Fitting Regulations
−
Municipal Building Codes,
−
Refer to AS/NZS 5601.1 for Gas Installations.
−
S.A.A. Wiring Code
−
Local Electrical Regulations
−
Any other statutory regulations
•
NOT SUITABLE FOR MARINE USE.
•
NOT INTENDED FOR FIREPLACE INSERT.
•
APPLIANCES INCORPORATING A LIVE FUEL EFFECT, AND DESIGNED TO OPERATE WITH
LUMINOUS FLAMES, MAY EXHIBIT SLIGHT CARBON DEPOSITION.
© Travis Industries
Safety Precautions
2/23/18 - 1479 Greenfield GSR2-Aust
5