Location Of Controls; Direct Operation - Lopi Greenfield GSR2 Manual

Operation
37

Location of Controls

Direct Operation

The fireplace may be directly operated from the battery holder. The three positions are below (see illustration
below):
ON – Burner turns on (regardless of transmitter settings).
OFF – Burner turns off (regardless of transmitter settings).
REMOTE – Burner is controlled by the transmitter.
NOTE: When the battery holder switch is turned to ON or OFF, the mode settings (Flame Height, Comfort
Control) will remain in the same state as before the switch was moved (i.e.: the IFC "remembers" the last
setting). If you wish to adjust the mode settings use the transmitter mode button to adjust the settings
(see "Mode Controls" on page 41). The thermostat and burner on/off operating functions will not work on
the transmitter.
© Travis Industries 2/23/18 - 1479 Greenfield GSR2-Aust