SPITFIRE MX
INSTALLING CANOPY
Canopy - - - - 1
Pilot - - - - 1
Antenna - - - - 1
Mirror - - - - 1
2x8mm
Tp screw - - - - 1
Centre stick - - - - 1
Item code: BH136A
2x8mm
Tp screw
A
B
A
37
Position the canopy so the rear
frame on the canopy is aligned with
the rear edge of the cockpit opening.
Use canopy glue to secure the
canopy to the canopy hatch. Use
low-tack tape to hold the canopy in
position until the glue fully cures.
Wrap the tape completely around
the canopy hatch.
B
Instruction Manual