Table of Contents
Advertisement
L2 main
Level 2
menu
ID Nr
categories
L2.5.1
L2.5.2
L2.6
DIAGNOSTIC
L2.6.1
L2.7
VIEW LOGS
L2.7.1
L2.7.2
L2.7.3
L2.7.4
L2.7.5
L2.7.6
L2.8
SHUTDOWN
L2.9
BATT CHNG
Honeywell
2023
L2 main menu
L2 submenu as
as displayed
displayed on LCD
on LCD
To verify or validate the accuracy of the items (for example,
VALIDATE P); after the appropriate item appears on the
VALIDATE P
display, Use the keypad to enter or change the value of
pressure/ temperature that ERX350 must measure. After you
enter the value, press. The ERX350 calculates the % ERROR.
%ERROR is the difference between the pres-
VALIDATE T
sure/temperature value measured by ERX350 and the value
(the entered value) that ERX350 must measure.
Functions as a sensor, and ensures that the pulse inputs
provided to ERX350 are functioning.
SENSOR TST
Allows you to view a specified Log Record's Date, Time, and
CRC value (in decimal).
Actual Log Item Values are not available. This function is
mainly to serve the needs of Compliance verification. Specify
AT-LOG1
a Log Record number to begin and then press the Enter Key
to view the actual record's parameters (Date, Time, and
CRC).
AT-LOG2
AT-LOG3
AT-LOG4
AT-LOG5
EVENT LOG
Special mode to take the unit out of service – i.e. to put in
long term storage (shelf mode) Limited functionality is
enabled in this mode –just time update. No volume or
measurements are performed. HMI is active.
Enter this mode when replacing the battery –includes
resetting battery gauge.
5.1 Getting Started with the Keypad
Item code
Description
5 User Access
86
Advertisement
Table of Contents
