Table of Contents
Advertisement
5 User Access
5.1 Getting Started with the Keypad
3. To access the passkey screen, in level 3 mode press OK. The following appears on the display.
0000000
PASSCODE appears.
For firmware versions before 1.0068, you must enter a five-digit security code followed by a two-
digit user ID code to enter level 3 mode. The default value for the level 3 passcode is 30000. The
default value of the last two-digit user ID is 00. Enter a two-digit user ID code followed by a five-
digit security passcode to enter level 2 or level 3 mode. You can enter any value for the event log.
user ID. If the unit is configured to log events in an event log, the user ID identifies the user who
made the changes in the event log.
For firmware version 1.0068 and later, of the 7 digits entered, the first two are the user id and the
last five are the passcode. By default only user 03 is permitted access to Level 3. The default
passcode for user 03 is 30000, so the value entered would be 0330000. Other users can be granted
access to level 3 menus, but a user can only access level 2 if they are not granted access to level 3.
(A single user can access level 2, level 3, or neither, but cannot access both level 2 and level 3.
Level 2 functionality is a subset of level 3 functionality.)
4. To enter the passcode, press the UP arrow or the DOWN arrow at the current position to change the
displayed digit to the required numeral.
5. For example, press the UP arrow thrice at the current position, the value 0000000 changes to
3000000.
6. Press the RIGHT arrow to move one position to the right. Using the UP arrow or the DOWN arrow
change the displayed digit to the required numeral.
7. For example, press the RIGHT arrow until you reach the sixth digit. At the sixth digit, press the UP
arrow thrice. The value 3000000 is changed to 3000030.
8. Repeat this step until you enter the passcode of the instrument.
9. To accept the changes after entering the last digit (all seven digits of passcode), press the RIGHT
arrow.
Attention:
You can also press OK for entering the passkey value.
The OK key enters the displayed digit at the current position and advances to the next position.
If the log in was successful, the display indicates that you are in level 3 mode. If the user ID or
passcode were invalid, you will be returned to the main level 1 menu.
10. Use the UP arrow and DOWN arrow to scroll through the main menu items (L3.2 through L3.10) in
Honeywell
2023
97
Advertisement
Table of Contents
