ElectrIQ iQool9PLUS-V2 User And Installation Manual page 22

AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered by the Time, and a
range of other influences, depending what other TUYA enabled devices you have on the network.
1. Press on the Scene tab at the
bottom of the Home screen
6. Chose the function, set
the value for the function,
and then press the back
button in the top right
corner, to return to the
previous screen.
WIFI CONTROL
2. Press on the Automation tab at
the top of the screen.
4. Setup is very similar to the scene
setup on the previous page, and
includes an extra section for specifying a
trigger for the scene to start.
Press the Pen next to "Please Enter
Scene Name" to input the name for your
Scene
Press the Red Plus next to "When any
condition is satisfied" to add the trigger
Press the Red Plus next to "Execute
following actions" to add the action
required. Then select the air conditioner
from the list of devices.
22
3. Press on the + at the top of the
5. Select the condition when the
automation should start. A number
of triggers can be combined.
7.
Once all the functions required have been added,
press the Save button in the top right corner to finalize
and save your new scene.
The automation is now set up, it can be turned on and
off using the toggle on the home page.
screen or press on Add
Automatic Action