AJAX Hub 2 Plus User Manual page 5

Lights up green.
Lights up red.
Lights up 180 seconds after
the loss of power, then ashes
every 10 seconds.
Blinks red.
If your hub has different indications, please contact our
will help you.
Access to indications
Hub users can see the Alerts and Malfunctions indication after they:
Arm/disarm the system using the Ajax keypad.
Enter the correct user ID or personal code on the keypad and perform an
action that has already been performed (for example, the system is
SIM card.
One communication channel is
connected: Ethernet or SIM
card.
The hub is not connected to
the internet or there is no
connection with the Ajax
Cloud service.
The external power supply is
disconnected.
The hub is reset to factory
settings.
every 10 seconds.
After a loss of power, the hub
will not light up immediately,
but will start ashing in 180
seconds.
If the external power supply is
off, the indicator will ash
every 10 seconds.
After a loss of power, the hub
will not light up immediately,
but will start ashing in 180
seconds.
If the external power supply is
off, the indicator will ash
every 10 seconds.
After a loss of power, the hub
will not light up immediately,
but will start ashing in 180
seconds.
The LED indication colour
depends on the number of
communication channels
connected.
Technical Support . They