Installation - AJAX Hub 2 Plus User Manual

Select a security company and click Send Monitoring Request. After that, the
security company will contact you and discuss the connection conditions. Or
you can contact them yourself (contacts are available in the app) to agree upon
a connection.
Connection to the Central Monitoring Station (CMS) is implemented via the
SurGard (Contact ID), ADEMCO 685, SIA (DC-09), and other proprietary
protocols. A complete list of supported protocols is available at the link .

Installation

Prior to installing the hub, make sure that you have selected the optimal location
and that it complies with the requirements of this manual. It is desirable that the
hub be hidden from direct view.
Make sure that the communication between the hub and all connected devices
is stable. If the signal strength is low (a single bar), we cannot guarantee a
stable operation of the security system. Implement all potential measures to
improve the signal quality. At the very least, relocate the hub as even
repositioning by 20 cm can signi cantly improve the signal reception.
If the device has a low or unstable signal strength, use a radio signal range
extender .
When installing and using the device, follow the general electrical safety
regulations for using electrical appliances, as well as the requirements of