System Features Learn Routine - Directed Electronics MERLIN 2000 Installation Manual

system features learn routine

The System Features Learn Routine
the feature settings using the Valet
1. Ignition: Turn the ignition on, then back off. (The H1/9 YELLOW wire must be connected.)
2. Select a feature: Press and release the Valet
sponding to the feature you wish to change. For example, to access the third feature, press
and release the Valet/Program button three times. Then press the button once more and
HOLD it. The siren will chirp the number of times corresponding to the feature you have
accessed.
3. Program the feature: While holding the Valet
the feature settings using the remote transmitter. If using a transmitter that has been pro-
grammed with either Autolearn Configuration 1 or 2, pressing
(default setting) and pressing
that has been programmed with Autolearn Configuration 3, these buttons have opposite
functions, so that pressing
will select the two-chirp setting.
NOTE: Features 5, 6 and 7 each have multiple settings. Pressing
the possible settings.
4. Release the Valet
Once a feature is programmed:
I Other features can be programmed.
I The learn routine can be exited if programming is complete.
To access another feature:
1. After programming a feature (Step 3 above), press and release the Valet
necessary to advance from the feature you just programmed to the next one you want to program.
2. Then press the Valet®/Program switch once more and hold it.
Example: In Step 3 above, if you just programmed the third feature in the menu and you would like to program
the seventh feature in the menu, you would press and release the Valet®/Program switch four times and then
press it once more and hold it. The siren would chirp seven times to confirm access to the seventh feature.
© 2001 Directed Electronics, Inc. Vista, CA
™ dictates how the unit operates. It is possible to access and change any of
® /Program switch.
will select the two-chirp setting. If using a transmitter
will select the one-chirp (default setting) and pressing
® /Program button.
® /Program button the number of times corre-
® /Program button, you can toggle between
will select the one-chirp
will toggle through all
® /Program switch the number of times
17