Terms And Symbols Used - 2N Analog Vario Installation Manual

Part No. 9134148E

1.2 Terms and Symbols Used

Terminology
• Line pick-up/seizure/off-hook – call start, line locked, busy.
• Line hang-up/clear – call end, handset hang-up.
• DTMF – dual tone multi-frequency signalling.
• PSTN – public switched telephone network.
• Outgoing call – 2N
button.
• Incoming call – telephone-2N
• Programming mode – 2N
into the intercom only.
• Code lock – mode for entering the password for switch 1 or 2 activation using a numerical
keypad.
• Telephone mode – you can make a call, dial a number and hang up using the numerical
keypad.
• DTMF transmission during call – for outgoing calls only, numbers are tone-dialled by a
numerical keypad button.
• Button substitution – the numerical keypad can be used instead of a number pre-stored
under a button memory.
• SIEMENS
• This adapter is required when connecting to a
Siemens HiPath Telephone system
®
Analog Vario-telephone connection made, e.g. by a pressing a
®
Analog Vario connection.
®
Analog Vario programming mode accessible from by dialling
Installation manual 2N® Analog Vario
®
adapter
15 / 77