2.
Use the hexagon key wrench included in the supply and remove the 2N
Vario metal cover. Remove the screw in the lower part of the metal cover and fold out the
cover.
3.
Use a cross-head screwdriver to remove the plastic cover and demount the cover.
Warning
•
Never remove the main board or camera electronics from under the lower
cover while installing 2N
cable from the main board. Do not bend and press upon the flat cable either.
Installation manual 2N® Analog Vario
®
Analog Vario. Do not disconnect the camera flat
®
Analog
20 / 77