Table of Contents
Advertisement
Parameter
REGEN. FLOW
REGEN. TYPE
UNITS
VOL. OVERRIDE/
VOLUMETRIC
HARDNESS UNITS
CAPACITY
HARDNESS
Ref. MKT-IM-010 / F - 16.01.2023
Options
DOWN FLOW
Down flow softener
UP FLOW
Up flow softener
FILTER
TIME CLOCK
DAY OF THE
Regeneration on
WEEK
METER
Metered immediate
IMMEDIATE
METER
Metered delayed
DELAYED
US
US units (default)
METRIC
0 to 9999999
mg/L
mg/L as CaCO
equivalent (default)
*DH
*FTH
*EH
0 to 9999999
Gram as CaCO
equivalent if hardness
L x °FTH if hardness unit
L x °dH if hardness unit
L x °eH if hardness unit
1 to 1999
mg CaCO
hardness unit is mg/L
1 to 199.9
°FTH if hardness unit is
1 to 112
°dH if hardness unit is
1 to 140.2
°eH if hardness unit is
Installer manual Fleck 3150 NXT/NXT2 - Programming
Definition
-
(default)
Do not use for 2510, 2750 and 2850
valve types.
Filter
Time clock
System 4 and 6 only.
System 4 and 6 only.
selected days
All system unless system 8.
Systems 4, 6 and 8 only.
(default)
-
Metric units
Litre
This screen will only display when
regeneration type selected is filter
meter immediate or Delayed.
This screen will only display when
3
regeneration type selected is
softener meter immediate or
-
delayed with metric units.
-
-
Those screens will only display
3
when regeneration type selected is
unit is mg/L
softener meter immediate or
delayed.
is °FTH
is °dH
is °eH
/L equivalent if
Those screens will only display
3
when regeneration type selected is
softener meter immediate or
delayed.
°FTH
Even if maximum theoretical
programmable value is 9999 or
°dH
999.9 (depending on the unit), the
controller will consider only up the
value listed in the side column.
°eH
Note
99 / 190
Advertisement
Table of Contents
