Table of Contents
Advertisement
Installer manual Fleck 3150 NXT/NXT2 - Programming
Options:
• weekly reserve (default);
• variable reserve;
• fixed%;
• fixed volume.
1. Select reserve type with
2. Press
to validate the selection and advance to the next
parameter.
Fixed%
Set the percentage of the total system capacity used to calculate the safety reserve capacity.
Info
The availability depends on reserve type programmed in the previous step.
1. Set the safety coefficient with
ð Can be adjusted from 0 to 50%;
ð Any value programmed above the maximum value will be
discarded and considered as the maximum above
mentioned value.
2. Press
to validate the selection and advance to the next
parameter.
Fixed volume
Set a fixed volume as reserve capacity.
Info
The availability depends on reserve type programmed in the previous step.
1. Set the reserve volume with
ð The volume range depend on capacity, in litre if metric
units were programmed or US gallon if US units were
programmed (see Units [
ð The maximum reserve volume capacity settable will
correspond to the half of the total volume;
ð Can be adjusted from 0 to 50%;
ð Any value programmed above the maximum value will be
discarded and considered as the maximum above
mentioned value.
2. Press
to validate the selection and advance to the next
parameter.
112 / 190
and
;
,
and ;
,
and ;
→
Page 109] );
No safety factor
programmed.
Ref. MKT-IM-010 / F - 16.01.2023
Advertisement
Table of Contents
