Installer manual Fleck 3150 NXT/NXT2 - Programming
6.2.6.4
Totalizer
Info
The controller registers the total volume of treated water that passes through the
meter since start-up (or last hard reset).
1. To reset, press and hold the buttons
until the display shows zero.
6.2.6.5
Reserve
Info
Shows the reserve capacity settings.
6.2.6.6
Use since regeneration
Info
Shows the volume at the outlet since last regeneration
6.2.6.7
Valve address
Info
Shows the position of the valve in a multiple valve system.
6.2.6.8
Last regeneration
Info
Shows the number of hours since the last regeneration, indicating the duration of the
current service cycle.
124 / 190
and
for 5 seconds
Ref. MKT-IM-010 / F - 16.01.2023