Table of Contents
Advertisement
Info
This parameter is visible only in meter immediate/delayed mode
1. Adjust the volume with
2. Press
to validate the selection and advance to the next
parameter.
6.2.4.6
Push settings
This parameter allows to push and copy settings from the one unit to all other connected units.
Info
This parameter is visible only in multi-units systems.
1. Select OFF or ON with
2. Press
to validate the selection and exit the programming by
saving the settings.
6.2.5
Master programming mode
Info
As soon as programming mode is entered, all parameters can be displayed or set to
suit the needs.
Depending on the current programming, some functions will not be displayed or will not
be selectable.
6.2.5.1
Master programming mode chart
Parameter
SETTINGS
REVIEW
LANGUAGE
NEDERLANDS
Ref. MKT-IM-010 / F - 16.01.2023
,
and .
and
.
Options
ON
OFF (Default)
ENGLISH
English (default)
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
PORTUGUES
Installer manual Fleck 3150 NXT/NXT2 - Programming
Definition
-
When settings review mode is on,
no programming changes can be
-
done.
-
French
German
Italian
Spanish
Dutch
Portuguese
Note
97 / 190
Advertisement
Table of Contents
