Table of Contents
Advertisement
1. Activate the relay with
2. Press
to validate the selection and advance to the next
parameter.
3. Set the relay activation time with
4. Press
to validate the selection and advance to the next
parameter.
5. Set the relay deactivation time with
6. Press
to validate the selection and advance to the next
parameter.
Chemical pump
Activate the relay output during the service based upon the volume of treated water.
Options:
• Disabled (default);
• Enabled.
Info
Only visible in metered systems.
This screen will only display on the lead (#1) unit for system types 6 & 7.
This parameter has two steps.
The first one determines the volume which activates the relay.
The second one determines how long the relay has to be activated once the volume has
passed.
Ref. MKT-IM-010 / F - 16.01.2023
and
.
,
and
,
and
Installer manual Fleck 3150 NXT/NXT2 - Programming
Disabled.
.
Relay enabled at the
beginning of regeneration.
.
Relay disabled 10 min. after
the start of regeneration.
Relay enabled during cycle 2
as in chapter Regeneration
cycles time [
→
Page 116] .
85 / 190
Advertisement
Table of Contents
